Bowstring Theory / Why We Blend

Why we blend Vectran and Dyneema

Why not build every string from one “best” material? Because no single material is best at everything. Every string is a trade between speed, stability and durability.

Building arrows too? Try the Arrow Spine Calculator.

The two fibers

What each one brings

Dyneema (HMPE)

Strong and light

  • Very strong and very light. It floats on water.
  • Its weak spot is creep, which is slow, permanent stretch under load. BCY says pure HMPE “will creep a little, especially under high tension in very hot temperatures.”
  • It melts at a relatively low temperature, about 144–152°C. DSM rates it for long-term use up to about 70°C.
Vectran (LCP)

Stable

  • Kuraray lists “excellent creep resistance” as a core property. BCY says Vectran “has no creep at the tension created by normal bows.”
  • It handles heat better than Dyneema and absorbs almost no moisture.
  • It is heavier. Its density is about 1.40 g/cm³, compared with under 1.0 for Dyneema.
  • Abrasion has to be managed. BCY switched to a newer, more abrasion-resistant Vectran in 452Xtra for “less fraying.”

Blend the two and you get most of Dyneema’s strength and lightness, with Vectran holding the string from growing.

The spectrum

From pure Dyneema to the most Vectran

The makers’ published blends. Where a maker doesn’t publish the ratio, I say so.

Mercury · B99 · 81250% Vectran
X9920% Vectran
452X / 452Xtra33% Vectran
← Slightly faster (BCY)More stable →

Bloodline Vec 99 is Dyneema SK99 plus Vectran, but Bloodline doesn’t publish the ratio, so it isn’t placed on the line. Bloodline’s coating is waxless.

How the trade-off works

Four things to weigh

Creep and stability

More Vectran, less creep

BCY calls both 452Xtra and X99 “no creep,” as long as the string has the correct number of strands. BCY calls 100% SK99 Mercury “low creep.” Low creep is good, but it isn’t zero.

On a compound, creep shows up as peep rotation, draw length growing, and timing drifting. That is why stability matters most there.

Speed

Pure Dyneema is slightly faster

BCY says 100% Dyneema gives “slightly faster arrow speed” than the no-creep blends. Part of the reason is weight: a lighter string, or one with fewer strands, gives a faster arrow on most bows.

I won’t give you a feet-per-second number for this. It depends on the bow, and the makers don’t publish one.

Durability

All of them are tough

BCY says all of its materials far exceed the strength a bowstring needs. String life depends more on shot count, cam condition, and whether you keep the string waxed than on the fiber.

Wax vs. waxless

Maintenance

BCY materials come waxed and need regular waxing. Bloodline B99 and Vec 99 use a coating instead of wax, which Bloodline says means less maintenance.

Color

Color choices

Color choices depend on the maker and material. BCY offers X99 and Mercury in solid colors only, and 452Xtra in all colors. Bloodline has its own color range.

BCY notes that fluorescent colors use heavier pigment and can run up to 12% larger in diameter, so I account for that when picking strand count.

Bottom line

There isn’t one best string

There is a best string for your bow and how you shoot it. Tell me what you shoot and what matters most to you, and I’ll pick the blend.

Next: strand counts

Ready to order?

Choose compound or recurve, then pick your material and colors.

Arrow Spine Calculator · Ask Will a question

Sources

Material facts on this page come from the makers’ published pages. Lines in my own voice are shop experience.